|
|
Model
939 Versatron Case Packer Features
1. 5-foot
infeed
2. On-demand
oscillator
3. "No-tools" lane
dividers
4. Alert
beacon
5. Down
product detectors
6. Guards
- full length |
7. Snap-in
grid
8. Optional
touch screen operator interface
9. Quick
disconnect wires for control devices
10. Quick-adjust
handles
11. Optional
flap opener
12. Sturdy
stainless steel construction |
|
|
Versatron
Description of Operation
A. Bottles
transfer onto the side of the infeed conveyor. Straight-in
butt connects are optional.
B. Bottles
move in mass through the oscillator. As gaps
are detected, the oscillator agitates bottles,
providing a gentle product division.
C. Bottles
move onto a dead plate, where they are stopped
and timed by overhead brakes.
D. Brakes
E. Pneumatic
Cylinder
F. The
pneumatic overhead brakes release each group
of product onto the riding strips.
G. Riding
Strips |
H. When
the riding strips are full and a case is in place,
sensors activate a shift of the riding strips,
allowing the bottles to funnel through the grid
fingers and into the case.
I. The
pneumatic "air-over-oil" lift table
will move the empty case up and the full
case down onto the take-away conveyor.
J. Hydraulic
Lift Table
K. Case
L. Grid
M. Dead
Plate
N. Cases
move back-to-back up the case conveyor. A
low level indicator will initiate a soft
stop. The machine will restart as cases are
supplied. |
Snap-in
Grid Basket
|
|
Standard-Knapp
introduced the packaging industry to grid-style
case packers and has since developed and advanced
the grid and grid finger technology. Fingers may
be plastic or stainless steel, depending upon the
application.
The "snap-in
grid basket" eliminates the need for hoists
and allows one case packer attendant to remove
and replace the grid during changeover. This system
is fast and efficient. The "roll-in caddie" design
makes changeover simple by allowing the grid to
roll in and snap up into place.
|
|
|
|
Options
Available for 939 Versatron Case Packer
• Narrow
case feed • Indexing case feed • Tandem
case handling
• Non-round product handling • Flap opener • Touch screen operator
interface
• Right angle, in-line or counter flow case handling
|
|
|
Case
Packer Features & Benefits
|
|
A. Quick-adjust
handles eliminate the need for tools.
B. Two
Thompson linear shafts provide exact
alignment and years of maintenance-free
operation.
C. Either
rubber-coated chain or stainless steel
chain is available upon request.
D. These
peg holes and a solenoid allow an immediate
table stop in the event of an E-stop
or power down.
E. Heavy-duty
construction makes this the most durable
lift table in the industry.
| Operation
and Maintenance Made Easy |
• Quick "no-tools" changeover
• Complete
interlocked guarding, designed into frame
• Easy
and convenient operator controls
• Quick
disconnect wires |
• Low
maintenance
• Stainless
steel construction
• "All-inclusive" base
machine competitively priced
• Modern
cell-type manufacturing guarantees
high quality and reliability |
|
|
|
939
Versatron Floor Plan
|
|
939
Versatron Specifications*
|
| Speed: |
Up
to 35 cpm** |
| Cases: |
• Plastic,
corrugated, wood
• HSC, RSC, Tablock, tray
• Height from 1.5 to full bottle height
• Tandem, double tier |
|
Infeed:
|
Butt
connect; side sweep onto 5' infeed extension |
| Controls: |
24
volts DC with an A-B SLC-500 |
| Main
Control Panel: |
Free-standing,
NEMA 12; one electrical connection, 15 amp @ 460V |
| Operator
Interface: |
On
swivel boom, rotates around machine; optional smart
screen display |
| Discharge: |
Powered
conveyor by customer |
| Air
Connection: |
60-80
PSIG, 1/2" NPT |
| Enclosures: |
NEMA
12 |
| Motors: |
Two
1 HP motors; packer motor with an AB 1333 frequency
drive |
The
939 Versatron Case Packer comes with a stainless steel
packer frame and infeed.
*
Standard-Knapp is committed to continuous product
improvement. Specifications
are subject to change without notice.
** Depending on product and cases. |
|
