|
Model
No. 296S Continuum™ Shrink Wrapper Specifications*
|
| Speed: |
50,
70, 100 tpm |
| Package/Case
Type: |
Shrink
Film & Corrugated, Chipboard |
| Finished
Case Dimensions: |
| |
Max. |
Min. |
| Width |
18.75" |
10.75" |
| Length |
14" |
8" |
| Height |
10.5" |
3" |
|
| Tray
Quality (warp tolerance): |
1/2" warped
per foot |
| Shrink
Film Specifications: |
Film
Type: HDEP & LDPE Blend
Roll Diameter: 550 mm = 21.65"
Film Width: 14" min., 24" max. |
| Construction: |
Frame:
Stainless Steel
Mechanical Parts: Mild Steel - Internal components painted Steel-it
Shafts: Stainless Steel
Hardware: Stainless Steel |
| Control
System: |
PLC,
Servo system for film cut. Main operator interface
for both tray and shrink functions. Additional small
operator interface at shrink cut are for assistance
in setup.
|
| Magazine: |
Dual
film roll holders with one stand-by |
| Lubrication: |
Standard
- Clustered Lube
Optional - Auto Lube |
| Power
Consumption: |
Voltage:
460 VAC standard
KVA: 72,000
Frequency: 60 hz, 3 phase |
| Air
Consumption: |
SCFM:
10 scfm max.
Pressure: 80 psig |
| Operating
Environment: |
Temperature
Range: 32-120°F
Washdown Method: Not Washdown
Elevation Range: 42-46" |
| Infeed: |
Integrated
with 296 Continuum™ Tray Packer discharge. Trays
are presented to Shrink Wrapper spaced from compression
section. |
| Physical
Dimensions: |
Length: < 35'
Width: < 4.4'
Height: < 8'
Infeed Elevation: 42-46"
Discharge Elevation: 42-46" |
| *
Standard-Knapp is committed to continuous product improvement.
Shrink Wrapper specifications are subject to change
without notice. Pack patterns vary for different diameter
products. |
